Customer Spotlight: Franklin Township Sewer Authority

The foundation of Franklin Township’s Sewerage Authority’s sewer inspection program is a dedicated focus on preventative maintenance. “Being proactive is the only way we can manage over 200 miles of sewer pipes inundated with infiltration,” said Scott Nocero, Franklin Township Sewerage Authority’s (FTSA) Operations Manager. Elements of their preventative maintenance program include ongoing sewer flushing, inspections and rehabilitation. These efforts have resulted in a significant reduction in inflow and infiltration (I&I) throughout their collection system.

“Timely and effective rehabilitation is the cornerstone of our I/I reduction program,” says Nocero. “My crew works meticulously to identify sources of I&I—whether they are cleaning with a video nozzle or inspecting with a sewer camera, if we have eyes inside our pipes we are looking for problem areas and strategizing what is needed to proactively address them.” Prior to 2016, FTSA’s inspection crew had to report defects causing infiltration to staff engineers who would decide whether the defect was critical enough to require rehabilitation. A bidding process would then take place before a contractor could come in to reline the defective pipe segment. “The whole process took a couple of weeks from start to finish. Meanwhile, water infiltration was filling the pipe—needlessly adding to the water we’d have to pump and transport to the wastewater treatment facility,” says Nocero. “If we are knowingly paying to treat clean water we are doing something wrong.”

Bruce Kosensky, Envirosight’s Direct Sales Manager and one of Nocero’s long-time advisors (from when Kosensky was the Director of Public Works at a local county), approached Nocero with information on a new mechanical point repair solution that could help the FTSA inspection crew take matters in their own hands. Nocero asked for an in-field demo of Quick-Lock pipe repair from Pipeline Renewal Technologies. “It was eye-opening to see that we had most of the equipment and manpower needed to perform point repair pipe rehabilitation in-house,” says Nocero.  “The process was quick and simple and my crew was most excited about adding another skill with little to no training—we quickly decided we needed to add Quick-Lock to our toolbox.” Quick-Lock is a stainless steel sleeve that structurally reinforces deteriorating sewer lines and seals out infiltration. It’s delivered to the repair location on a wheeled flow-through packer pushed by a CCTV crawler. Once in position, air pressure supplied to the packer expands the sleeve tightly against the host pipe wall—sealing up any defects in the pipe.

Now, when the FTSA’s sewer inspection crew identifies a pipe with a defect they quickly make an assessment whether it is a good candidate for Quick-Lock point repair, and if so, they get a jump on fixing the problem. “For example, just last week we found a leaky joint and were able to rehabilitate the pipe segment within an hour,” says Nocero.

The cost savings have been substantial for FTSA. “The Quick-Lock point repair costs us $575.00 per repair, plus the cost of labor which we are paying for whether or not we’re doing the repair,” says Nocero. “Prior to Quick-Lock, we were spending $2,500-$2,800 to reline problem pipes presenting infiltration,” says Nocero. “Now, we only reline pipes that show multiple defects within a four-foot segment and could benefit from comprehensive relining—for everything else we use Quick-Lock.” In the past two months FTSA has performed seven point repairs using the Quick-Lock system—saving them over $6,500 per month.

“Even FTSA’s Board of Commissioners have applauded our efforts to embrace and use point repair technology to save time, money, decrease our response time and tackle I/I head-on”, says Nocero. “Being able to show them our progress with implementing a point repair workflow through before and after videos has been very fulfilling.”

“Taking our sewer cleaning and inspection program and making it into a comprehensive sewer management program has unequivocally been one of the best decisions we’ve made,” says Nocero. “My advice for anyone looking to implement a similar point repair workflow is to start by getting an in-field demo. Seeing firsthand how the whole workflow performs in your system can help you determine if it is suited for the pipes you manage. Also, get your whole crew in on the demo—their buy-in is a key component to success.”

To learn more about Franklin Township Sewerage Authority visit: http://ftsa-nj.org/.

Click below to request an in-field demo of Quick-Lock sewer point repair or get personalized information: